Nitrogen generator
For custom nitrogen production
Tailored for SLS 3D printing
Nitrogen generator - key advantages
Own
production
The use of a nitrogen generator brings absolute independence from another source. Cylinder handling and associated logistics are also eliminated.
Accurate
quantity
and quality
The nitrogen generator provides a continuous supply of nitrogen to the printer in exactly the required quantity with the required air number and pressure to the printer.
Economic
solutions
The price per 1 m³ is up to 10 times lower than for cylinders when using a nitrogen generator.
Maximising the potential of
Not taking advantage of SLS 3D printing of PA11 materials with nitrogen when the SLS printer has a built-in nitrogen chamber is like buying a Ferrari with a 130km/h speed limiter. Only with a precise supply of nitrogen will the SLS printer show its potential
Easy operation
The operation of the generator is surprisingly simple. After a short training you can start using it to the full.
24/7 availability
Compared to the use of cylinders, the volume of which must be monitored, the nitrogen from the generator is available continuously and in top quality.
Price from:
194.490 Kč (bez DPH)
Environmentally friendly solutions
There is no change of state or loss of nitrogen during generation. It is therefore a very environmentally friendly process.
Security
Nitrogen in a cylinder or container is subject to strict safety rules which, if not followed, can be dangerous. This is not the case with the generator.
Technical Specifications
General data
| Weight | 60 [kg] (132.3 [lbs]) |
|---|---|
| Dimensions | 1150 x 560 x 285 mm |
Technical parameters
| Achievable nitrogen purity | 90%-99.5% |
|---|---|
| Inlet temperature range | 5-50°C |
| Nominal compressed air consumption | from 5.76 m³/hr |
| Nominal nitrogen supply | up to 10.08 m³/hr |
| Air number | up to 4.0 |
| Pressure dew point | -40°C |
| Input connection size G | G 1 /2" |
| Inlet pressure range | 4 - 13 bar |
| Required inlet air quality | 1 -4-1 according to ISO 857 3-1 :201 0 |
