MMS
Material management system
to automate the preparation of your materials
Key benefits
Material management system
It automates material storage, preparation and post-print recovery, simplifying and ensuring successful printing of ultra-polymers such as PEEK, ULTEM™ and composites.
Partial annealing of materials
Annealing materials after 3D printing increases strength, durability and chemical resistance, and the current 3DGence MMS system includes a compartment for preparation and annealing, with programmed cycles for each material.
Drying and material preparation
The additional use of PAEK materials in 3DGence MMS™ significantly increases strength, durability and corrosion resistance.
Process control and print traceability
Each spool of material purchased from 3DGence is equipped with an NFC tag with a unique ID. Once selected, the material is registered by scanning into the MMS and integrated with 3DGence CONNECT™
Price from:
306.510 Kč (bez DPH)
Technical data
Parameters
| Height | 700 mm |
|---|---|
| Width | 720 mm |
| Depth | 550 mm |
| Weight | 30.5 kg (67.1 lbs) |
| Average energy consumption | 6 W |
| Working pressure | 5.0 - 8.6 bar / 72.5 - 125.0 psi |
| Voltage | 230 V AC, 60 Hz or 110 V, 50 Hz |
| Size of internal grate holes | 6 x 6 mm (0.2 x 0.2 in) |
| Working space size | 675 x 450 x 415 mm (26.6 x 17.7 x 16.3 in) |
| Working space capacity | 10 kg (22 lbs) |
| Minimum air flow | 290 l/min |
| Filter type | HEPA |
| Abrasive material container capacity | 5.44 kg (12 lbs) / 2.5 l |
| Package size/weight | 790 x 545 x 765 mm (31.1 x 21.5 x 30.1 in) / 45 kg (99.2 lbs) |
| Contents of the package | Sandblaster + 8 kg (17.6 lbs) of abrasive material + manual + accessories |
